Pharmaceutics

  • 18 topics
  • 1,024 questions
  • Library, from GHS 83.33 a month

Topics

  1. Advanced drug delivery systems and nanoparticles

    49 questions

    • Outline the principles of advanced drug delivery systems.
    • Describe methods of preparing nanoparticles and their characterisation.
    • Describe the main nanocarriers and their advantages.
    • Distinguish passive targeting from active targeting.
  2. Bulk properties and flow of powders

    63 questions

    • Describe the behaviour of powders in the fluidised state.
    • Define and calculate true, bulk and tapped density, porosity and void fraction.
    • Describe and interpret measures of flowability: angle of repose, Carr's compressibility index, Hausner ratio, shear cell testing.
    • Describe ways of improving powder flow and explain how glidants act.
    • Explain the interparticulate forces responsible for cohesion and how particle properties affect flow.
  3. Compaction, compression and lubrication

    66 questions

    • Apply the Heckel equation to distinguish plastic from brittle materials.
    • Describe the measurement of punch forces in instrumented tablet presses.
    • Distinguish compression from consolidation and describe the stages of compaction.
    • Explain how deformation behaviour affects bonding and tablet strength.
    • Explain how force is transmitted through a powder mass.
    • Evaluate lubricant efficiency from the R value and ejection force.
    • Explain why lubrication is needed and describe common lubricants.
  4. Distillation

    61 questions

    • Describe the behaviour of immiscible binary systems and the principle of steam distillation.
    • Describe vapour–liquid equilibrium in miscible binary systems using Raoult's and Dalton's laws.
    • Describe flash distillation, distillation under reduced pressure and molecular (short-path) distillation.
    • Explain positive and negative deviations from Raoult's law and the formation of minimum- and maximum-boiling azeotropes.
    • Describe simple and fractional distillation and their applications.
  5. Drying

    46 questions

    • Explain the factors affecting drying rate and the problem of solute migration.
    • Interpret a drying-rate curve and calculate moisture content.
    • Explain the mechanism of drying as simultaneous heat and mass transfer.
    • Describe tray, fluidised-bed, spray, vacuum, freeze and microwave dryers.
  6. Expression

    42 questions

    • Define expression and describe its use to obtain fixed oils and juices from plant material.
    • Explain the factors that affect yield in expression (pre-treatment, moisture content, temperature, pressure).
    • Describe the construction and operation of the screw (expeller) press and the hydraulic press, and compare them.
  7. Extraction

    63 questions

    • Describe percolation and compare it with maceration.
    • Define extraction (menstruum, marc) and explain the stages of solvent extraction from plant material: solvent penetration, dissolution of constituents and diffusion out of the tissue.
    • Describe and compare infusion, decoction, digestion and maceration (simple and multiple), and select the appropriate method for a given material.
    • Explain how particle size, temperature, agitation, solvent-to-material ratio and time affect the rate and completeness of extraction.
    • Explain the factors that govern the choice of extraction solvent (selectivity, polarity, safety, stability, cost), comparing water, ethanol and hydroalcoholic mixtures.
  8. Filtration

    51 questions

    • Define slurry, filtrate, filter medium, filter cake and filter aid, and describe the mechanisms of filtration.
    • Explain the principles of ultrafiltration and reverse osmosis and their pharmaceutical applications.
    • Describe filtration equipment and select equipment for a given scale and slurry.
    • Use Darcy's equation to explain how pressure difference, filter area, liquid viscosity, and cake thickness and permeability affect the rate of filtration.
    • Describe the types of filter media and filter aids, and select a medium for a given application.
  9. Granulation

    59 questions

    • Compare wet granulation, dry granulation and direct compression.
    • Explain the reasons for granulation.
    • Describe wet granulation: process steps, binders, equipment and end-point determination.
    • Describe the mechanisms of granule formation and growth.
    • Describe dry granulation by slugging and roller compaction.
  10. Hard and soft gelatin capsules

    48 questions

    • Explain the effects of moisture and storage conditions on gelatin shells.
    • Describe the formulation of hard-capsule fills and filling methods.
    • Describe the formulation of soft-capsule fills and incompatibilities.
    • Compare hard and soft gelatin capsules: shell composition, manufacture, sizes.
  11. Modified-release oral dosage forms

    54 questions

    • Describe zero-order, first-order and Higuchi release kinetics.
    • Explain the rationale, advantages and limitations of modified-release products.
    • Define and distinguish immediate, delayed, prolonged, controlled and pulsatile release.
    • Describe the mechanisms used to control drug release.
  12. Packaging definitions, functions and storage conditions

    53 questions

    • Explain the relevance of climatic zones to stability testing and packaging selection.
    • Define pharmacopoeial container types and storage directions.
    • Define pharmaceutical packaging and its components.
    • Describe the functions of packaging.
  13. Packaging materials and their selection

    35 questions

    • Describe blister and strip packs and select packaging for a moisture-sensitive product.
    • Explain container–product interactions and how they are tested.
    • Describe the characteristics, advantages and limitations of glass, plastics, metals and rubber closures.
  14. Particle size analysis and surface area (micromeritics)

    80 questions

    • Apply Stokes' law to calculate sedimentation velocity or Stokes' diameter.
    • Describe the principle, size range, advantages and limitations of microscopy, sieving, sedimentation, electrical sensing zone method and laser light scattering.
    • Define equivalent diameters and describe number, volume and mass distributions.
    • Describe methods for measuring specific surface area and relate surface area to particle size.
    • Explain why particle size matters in pharmaceutical products.
  15. Particle size reduction (comminution) and size separation

    58 questions

    • Describe size separation by sieving and classification.
    • State the energy laws of comminution (Rittinger, Kick, Bond).
    • Explain the reasons for size reduction and the mechanisms involved.
    • Describe the cutter, roller, hammer, ball and fluid-energy (jet) mills.
  16. Powders and granules as dosage forms

    36 questions

    • Describe the mechanisms of powder mixing and the causes of segregation.
    • Explain the formulation of effervescent granules.
    • Describe bulk and divided oral powders, dusting powders, powders for reconstitution and effervescent granules.
  17. Quality control of solid dosage forms

    62 questions

    • Calculate and interpret test results: friability, uniformity of mass, tensile strength.
    • Describe dissolution apparatus, media and sink conditions.
    • Describe how quality control and good manufacturing practice assure product quality.
    • Explain how formulation and process variables affect quality-control results.
    • Describe the pharmacopoeial and non-pharmacopoeial tests for tablets and capsules.
  18. Tablets

    98 questions

    • Describe the compression cycle on single-punch and rotary tablet presses.
    • Identify tablet manufacturing defects and explain their causes and remedies.
    • Describe the types of tablet with their advantages and limitations.
    • Explain disintegration mechanisms.
    • Describe the reasons for tablet coating, types of coating and common defects.
    • Describe the functions and examples of tablet excipients.

Find your course

Type your course code or its title. We show you exactly what we hold for it.

Or browse by programme